bu hatayı alıyorum
Operation : Wipe EFS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM48)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...Failed
Operation Finished.
QcFire Ver. 4.7
Operation : Full Reset EFS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM48)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...Failed
Operation Finished.
QcFire Ver. 4.7
Operation : Wipe EFS (FastBoot)
Searching for Device in FastBoot Mode...OK
Reading Information...OK
FastBoot Ver. : GetVar Variable Not found
Product : lavender
Bootloader : Locked
Bootloader must be Unlocked for this operation.
QcFire Ver. 4.7
Operation : Wipe EFS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM48)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_022]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Reading Auth Blob...OK
Blob : AQAAAD0BAADx1T7d1SDe6-HkWneKRI3BtAZJZw
Getting Auth Data...Connecttion to Auth App Failed!
Run Auth App if not running, or restart Auth App!
Storage Initializaton Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 4.7