Yardım Mi5 gps.conf

onur17

Yeni Üye
MIUI Sever
Yeni Üye
Adım
Onur
Cihazım
mi5 prime
Yaş
40
Konum
izmir
Katılım
15 Mart 2016
Konular
3
Mesajlar
22
Tepki puanı
4
Puanları
3
Selamlar,

Gps i sorunsuz çalışan bir arkadaş gps.conf dosyasını (yada içeriğini text olarak) paylaşabilir mi?

bir sıkıntım daha var, system\etc klasöründeki gps.conf dosyasını değiştirdiğimde hemen eski haline dönüyor, cihazda root açık ve dosya yöneticisinin erişim izni var. recovery den ilgili klasöre erişemediğim için oradan da değiştiremiyorum.

mevcut dosyam şu şekilde
Kod:
SUPL_HOST=supl.qxwz.com
PPS_DEVICENAME=/dev/pps0
#MSB=0X1
LPPE_CP_TECHNOLOGY=0
NMEA_PROVIDER=0
AGPS_CONFIG_INJECT=1
XTRA_TEST_ENABLED=1
CAPABILITIES=0x37
SUPL_MODE=3
#XTRA2=2
#MSA=0X2
#AGPS_CERT_WRITABLE_MASK=0
#DISABLE=0
#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
AP_CLOCK_PPM=100
SUPL_VER=0x20000
ERR_ESTIMATE=0
#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
PROPAGATION_TIME_UNCERTAINTY=1
LPPE_UP_TECHNOLOGY=0
SGLTE_TARGET=0
LPP_PROFILE=0
NTP_SERVER=tr.pool.ntp.org
#EXTERNAL_DR_ENABLED=0
AP_TIMESTAMP_UNCERTAINTY=10
MISSING_PULSE_TIME_DELTA=900
A_GLONASS_POS_PROTOCOL_SELECT=0
INTERMEDIATE_POS=0
DR_SYNC_ENABLED=0
USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1
#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
SUPL_PORT=7275
XTRA_VERSION_CHECK=0
DEBUG_LEVEL=2
SUPL_ES=0
GPS_LOCK=3
#AUTO=1
XTRA_THROTTLE_ENABLED=0
#XTRA3=3
mi5 64gb
xiaomi eu 7.2.16 beta
 

ertanx

Emekli Yönetici
Emekli Yönetici
Elit Üye
MIUI Sever
SMS Onaylı
Adım
Ertan
Cihazım
Mi 6
Meslek
Teknisyen
Konum
Ankara
Katılım
20 Haziran 2014
Konular
48
Mesajlar
1.151
Tepki puanı
624
Puanları
128
onur17 GP'da FasterGps var hocam onu neden denemiyor sunuz?
 

onur17

Yeni Üye
MIUI Sever
Yeni Üye
Adım
Onur
Cihazım
mi5 prime
Yaş
40
Konum
izmir
Katılım
15 Mart 2016
Konular
3
Mesajlar
22
Tepki puanı
4
Puanları
3
onda her satırı tek tek girmek lazım ve çoklu satır girilemiyor.
 

onur17

Yeni Üye
MIUI Sever
Yeni Üye
Adım
Onur
Cihazım
mi5 prime
Yaş
40
Konum
izmir
Katılım
15 Mart 2016
Konular
3
Mesajlar
22
Tepki puanı
4
Puanları
3
işin ilginçi FasterGps te tek tek girsem de geri dönünce eski halini alıyor.
 

ertanx

Emekli Yönetici
Emekli Yönetici
Elit Üye
MIUI Sever
SMS Onaylı
Adım
Ertan
Cihazım
Mi 6
Meslek
Teknisyen
Konum
Ankara
Katılım
20 Haziran 2014
Konular
48
Mesajlar
1.151
Tepki puanı
624
Puanları
128
Kod:
NTP_SERVER=tr.pool.ntp.org
NTP_SERVER=0.tr.pool.ntp.org
NTP_SERVER=2.tr.pool.ntp.org
NTP_SERVER=3.tr.pool.ntp.org
NTP_SERVER=0.asia.pool.ntp.org
NTP_SERVER=1.asia.pool.ntp.org
NTP_SERVER=2.asia.pool.ntp.org
NTP_SERVER=3.asia.pool.ntp.org
XTRA_SERVER_1=/data/xtra.bin
AGPS=/data/xtra.bin
AGPS=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
DEFAULT_AGPS_ENABLE=TRUE
DEFAULT_USER_PLANE=TRUE
REPORT_POSITION_USE_SUPL_REFLOC=1
QOS_ACCURACY=50
QOS_TIME_OUT_STANDALONE=60
QOS_TIME_OUT_agps=89
QosHorizontalThreshold=1000
QosVerticalThreshold=500
AssistMethodType=1
AgpsUse=1
AgpsMtConf=0
AgpsMtResponseType=1
AgpsServerType=1
AgpsServerIp=3232235555
INTERMEDIATE_POS=1
C2K_HOST=c2k.pde.com
C2K_PORT=1234
SUPL_HOST=FQDN
SUPL_HOST=lbs.geo.t-mobile.com
SUPL_HOST=supl.google.com
SUPL_PORT=7276
SUPL_SECURE_PORT=7275
SUPL_NO_SECURE_PORT=3425
SUPL_TLS_HOST=FQDN
SUPL_TLS_CERT=/etc/SuplRootCert
ACCURACY_THRES=5000
CURRENT_CARRIER=common
onur17 bu dosya işini görür mü?
 

onur17

Yeni Üye
MIUI Sever
Yeni Üye
Adım
Onur
Cihazım
mi5 prime
Yaş
40
Konum
izmir
Katılım
15 Mart 2016
Konular
3
Mesajlar
22
Tepki puanı
4
Puanları
3
bu dosyayı bende buldum da, düzenleme işini çözemedim.

edit: es file exp ile yaptım.
 
Son düzenleme:

onur17

Yeni Üye
MIUI Sever
Yeni Üye
Adım
Onur
Cihazım
mi5 prime
Yaş
40
Konum
izmir
Katılım
15 Mart 2016
Konular
3
Mesajlar
22
Tepki puanı
4
Puanları
3
global 7.2.16 ya geçtim gsp.conf şu hale geldi.
belki birilerinin işine yarar.
Kod:
#Uncommenting these urls would only enable
#the power up auto injection and force injection(test case).
#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin

#Version check for XTRA
#DISABLE = 0
#AUTO    = 1
#XTRA2   = 2
#XTRA3   = 3
XTRA_VERSION_CHECK=0

# Error Estimate
# _SET = 1
# _CLEAR = 0
ERR_ESTIMATE=0

#Test
NTP_SERVER= asia.pool.ntp.org
#Asia
# NTP_SERVER=asia.pool.ntp.org
#Europe
# NTP_SERVER=europe.pool.ntp.org
#North America
# NTP_SERVER=north-america.pool.ntp.org

# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
#               4 - Debug, 5 - Verbose
# If DEBUG_LEVEL is commented, Android's logging levels will be used
DEBUG_LEVEL = 2

# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0

# Below bit mask configures how GPS functionalities
# should be locked when user turns off GPS on Settings
# Set bit 0x1 if MO GPS functionalities are to be locked
# Set bit 0x2 if NI GPS functionalities are to be locked
# default - non is locked for backward compatibility
GPS_LOCK = 3

# supl version 1.0
SUPL_VER=0x20000

# Emergency SUPL, 1=enable, 0=disable
SUPL_ES=0

#Choose PDN for Emergency SUPL
#1 - Use emergency PDN
#0 - Use regular SUPL PDN for Emergency SUPL
USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1

#SUPL_MODE is a bit mask set in config.xml per carrier by default.
#If it is uncommented here, this value will overwrite the value from
#config.xml.
#MSA=0X2
#MSB=0X1
SUPL_MODE=3

# GPS Capabilities bit mask
# SCHEDULING = 0x01
# MSB = 0x02
# MSA = 0x04
# ON_DEMAND_TIME = 0x10
# GEOFENCE = 0x20
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
CAPABILITIES=0x37

# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
# ACCURACY_THRES=5000

################################
##### AGPS server settings #####
################################

# FOR SUPL SUPPORT, set the following
SUPL_HOST=supl.qxwz.com
SUPL_PORT=7275

# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234

# Bitmask of slots that are available
# for write/install to, where 1s indicate writable,
# and the default value is 0 where no slots
# are writable. For example, AGPS_CERT_WRITABLE_MASK
# of b1000001010 makes 3 slots available
# and the remaining 7 slots unwritable.
#AGPS_CERT_WRITABLE_MASK=0

####################################
#  LTE Positioning Profile Settings
####################################
# 0: Enable RRLP on LTE(Default)
# 1: Enable LPP_User_Plane on LTE
# 2: Enable LPP_Control_Plane
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
LPP_PROFILE = 0

################################
# EXTRA SETTINGS
################################
# NMEA provider (1=Modem Processor, 0=Application Processor)
NMEA_PROVIDER=0
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
SGLTE_TARGET=0

##################################################
# Select Positioning Protocol on A-GLONASS system
##################################################
# 0x1: RRC CPlane
# 0x2: RRLP UPlane
# 0x4: LLP Uplane
A_GLONASS_POS_PROTOCOL_SELECT = 0

##################################################
# Select technology for LPPe Control Plane
##################################################
# 0x1: DBH for LPPe CP
# 0x2: WLAN AP Measurements for LPPe CP
LPPE_CP_TECHNOLOGY = 0

##################################################
# Select technology for LPPe User Plane
##################################################
# 0x1: DBH for LPPe UP
# 0x2: WLAN AP Measurements for LPPe UP
LPPE_UP_TECHNOLOGY = 0

##################################################
# AGPS_CONFIG_INJECT
##################################################
# enable/disable injection of AGPS configurations:
#     SUPL_VER
#     SUPL_HOST
#     SUPL_PORT
#     C2K_HOST
#     C2K_PORT
#     LPP_PROFILE
#     A_GLONASS_POS_PROTOCOL_SELECT
# 0: disable
# 1: enable
AGPS_CONFIG_INJECT = 1
# AP Coarse Timestamp Uncertainty
##################################################
# default : 10
# or as per clock uncertainty of product
AP_TIMESTAMP_UNCERTAINTY = 10

#####################################
# GNSS PPS settings
#####################################
#AP DR engine availability status
# 0 : NO AP DR (default)
# 1 : AP DR enabled
#EXTERNAL_DR_ENABLED = 0

#####################################
#DR_SYNC Pulse Availability
#####################################
# 0 : DR_SYNC pulse not available (default)
# 1 : DR_SYNC pulse available
DR_SYNC_ENABLED = 0

#####################################
#PPS Device name
#####################################
PPS_DEVICENAME = /dev/pps0

#####################################
#AP Clock Accuracy
#####################################
AP_CLOCK_PPM = 100

#####################################
#MAX ms difference to detect missing pulse
#####################################
MISSING_PULSE_TIME_DELTA = 900

#####################################
#Propagation time uncertainty
#####################################
PROPAGATION_TIME_UNCERTAINTY = 1
XTRA_TEST_ENABLED = 1
XTRA_THROTTLE_ENABLED = 0
benim gps sıkıntısı çözülmedi :(
 
Üst Alt